您当前位置: 首页 » 2014年11月22日
按日期归档: 2014年11月22日

无线控制器初始化

Would you like to terminate autoinstall? [yes]: yes

System Name [Cisco_37:d0:44] (31 characters max): Cisco-AP

Enter Administrative User Name (24 characters max): admin

Enter Administrative Password (3 to 24 characters): ********

Re-enter Administrative Password                 : ********

Enable Link Aggregation (LAG) [yes][NO]: no

Management Interface IP Address: 10.1.2.1

Management Interface Netmask: 255.255.255.0

Management Interface Default Router: 10.1.2.254

Management Interface VLAN Identifier (0 = untagged): 2

Management Interface Port Num [1 to 4]: 1

Management Interface DHCP Server IP Address: 10.1.4.254

Virtual Gateway IP Address: 1.1.1.1

Multicast IP Address: 239.0.0.100

Mobility/RF Group Name: Group1

Network Name (SSID): SB

 

Configure DHCP Bridging Mode [yes][NO]: yes

Warning! Enabling Bridging mode will disable Internal DHCP server and DHCP Proxy feature.

May require DHCP helper functionality on external switches.

 

Allow Static IP Addresses [YES][no]: yes

 

Configure a RADIUS Server now? [YES][no]: no

Warning! The default WLAN security policy requires a RADIUS server.

Please see documentation for more details.

 

Enter Country Code list (enter ‘help’ for a list of countries) [US]: CN

 

Enable 802.11b Network [YES][no]: yes

Enable 802.11a Network [YES][no]: yes

Enable 802.11g Network [YES][no]: yes

Enable Auto-RF [YES][no]: yes

 

Configure a NTP server now? [YES][no]: no

Configure the system time now? [YES][no]: no

 

Warning! No AP will come up unless the time is set.

Please see documentation for more details.

 

Configuration correct? If yes, system will save it and reset. [yes][NO]:

 

 

 

(Cisco Controller) >show sysinfo

 

Manufacturer’s Name………………………… Cisco Systems Inc.

Product Name………………………………. Cisco Controller

Product Version……………………………. 7.6.120.0

Bootloader Version…………………………. 1.0.16

Field Recovery Image Version………………… 1.0.0

Firmware Version…………………………… PIC 16.0

Build Type………………………………… DATA + WPS

 

System Name……………………………….. Cisco-AP

System Location…………………………….

System Contact……………………………..

System ObjectID……………………………. 1.3.6.1.4.1.9.1.1279

IP Address………………………………… 10.1.2.1

Last Reset………………………………… Power on reset

System Up Time…………………………….. 0 days 1 hrs 14 mins 41 secs

System Timezone Location…………………….

System Stats Realtime Interval………………. 5

System Stats Normal Interval………………… 180

 

 

–More– or (q)uit

Configured Country…………………………. CN – China

Operating Environment………………………. Commercial (0 to 40 C)

Internal Temp Alarm Limits………………….. 0 to 65 C

Internal Temperature……………………….. +25 C

External Temperature……………………….. +30 C

Fan Status………………………………… 3700 rpm

 

State of 802.11b Network……………………. Enabled

State of 802.11a Network……………………. Enabled

Number of WLANs……………………………. 1

Number of Active Clients……………………. 0

 

Burned-in MAC Address………………………. 68:86:A7:37:D0:40

Maximum number of APs supported……………… 50